Hydraulic Breaker · Heavy Class
PANDA FORCE PF200
8,000 J Impact Energy · 20–40 Tonne Excavators · 170 mm Chisel
The PF200 is PANDA FORCE's heavy-class hydraulic breaker, built for the most demanding applications — large-scale quarrying, primary rock excavation, major demolition and mining secondary breaking on 20–40 tonne excavators. Maximum impact energy, maximum productivity. Manufactured by SOOSAN Heavy Industries.
Technical Specifications
Full specification data for the PANDA FORCE PF200 hydraulic breaker.
| Model | PANDA FORCE PF200 |
| Operating Weight | 2,000 kg |
| Applicable Excavator | 20–40 t |
| Impact Rate | 300–700 bpm |
| Impact Energy | 8,000 J |
| Required Oil Flow | 130–200 L/min |
| Working Pressure | 160–200 bar |
| Back Pressure (max) | 30 bar |
| Chisel Diameter | 170 mm |
| Chisel Length | 820 mm |
| Tool Stroke | 580 mm |
| Mounting | Heavy-duty excavator bracket (S-type / pin-on) |
| Hose Connections | 1.25-inch BSP / SAE O-ring face seal |
| Body Dimensions (L×W×H) | 2,280 × 520 × 460 mm |
| Noise Level | ≤ 108 dB(A) at 1 m |
| Warranty | 12 months / 2,000 operating hours |
Engineering Details
Six key engineering systems that define PF200 performance and reliability.
High-Capacity Nitrogen Accumulator
Large-volume nitrogen accumulator handles the extreme pressure spikes generated at 8,000 J impact energy, protecting the excavator's high-flow hydraulic system and extending pump life.
Auto-Lube Greasing System
Integrated auto-lube port with high-volume grease capacity. Correct lubrication at 2-hour intervals extends the 170 mm chisel bush life to 900+ operating hours under normal conditions.
Heavy-Duty Tie-Rod Construction
Oversized high-tensile steel tie rods rated for 8,000 J repeated impact loads. Pre-tensioned assembly eliminates joint movement under the extreme forces generated by the PF200.
Hardox Front Head
Front head manufactured from Hardox 500 wear plate — the hardest commercially available steel for this application. Replaceable chisel bush rated for 900+ hours before replacement.
Idle-Blow Protection
High-speed pressure-sensing idle-blow cut-off is critical at 8,000 J — a single blank fire at full energy can cause catastrophic internal damage. The PF200 system responds within 0.2 seconds.
Integrated Dust Protection System
Positive-pressure dust exclusion system prevents fine rock dust from entering the chisel bush area during high-intensity quarry and mining operations, extending service intervals significantly.
Excavator Compatibility
Verified compatible excavator models in the 20–40 tonne class. Always confirm auxiliary flow and pressure before ordering.
| Brand | Models | Oil Flow | Pressure | Notes |
|---|---|---|---|---|
| Caterpillar (CAT) | CAT 323–CAT 340 | 130–200 L/min | 160–200 bar | High-flow auxiliary standard on 330+ |
| Komatsu | PC210–PC360 | 130–195 L/min | 160–198 bar | SAE O-ring fittings; PC360 preferred |
| Hitachi | ZX200–ZX350 | 130–200 L/min | 160–200 bar | BSP fittings; ZX350 ideal match |
| Volvo | EC220–EC380 | 135–200 L/min | 160–200 bar | High-flow auxiliary standard on EC300+ |
| Hyundai | HX220–HX380 | 130–195 L/min | 160–198 bar | SAE O-ring fittings; R320 ideal match |
| Doosan / Develon | DX225–DX380 | 130–195 L/min | 160–198 bar | Proportional auxiliary control on DX225+ |
| SANY | SY215–SY365 | 130–200 L/min | 160–200 bar | Confirm high-flow auxiliary circuit |
| XCMG | XE215–XE370 | 130–195 L/min | 160–198 bar | BSP fittings; XE370 recommended |
PANDA FORCE Breaker Range Comparison
How the PF200 sits within the full PANDA FORCE hydraulic breaker lineup.
| Specification | PF30 | PF70 | PF121 | PF200 |
|---|---|---|---|---|
| Operating Weight | 300 kg | 700 kg | 1,200 kg | 2,000 kg |
| Applicable Excavator | 1.5–4 t | 4–10 t | 10–20 t | 20–40 t |
| Impact Energy | 350 J | 1,200 J | 3,500 J | 8,000 J |
| Impact Rate | 600–1,200 bpm | 500–1,000 bpm | 400–900 bpm | 300–700 bpm |
| Required Oil Flow | 20–40 L/min | 40–80 L/min | 80–130 L/min | 130–200 L/min |
| Chisel Diameter | 68 mm | 100 mm | 135 mm | 170 mm |
| Typical Application | Trenching, light demo | Medium rock, concrete | Hard rock, heavy demo | Quarry, large demolition |
Application Gallery
Six primary application sectors where the PF200 delivers proven performance.
Large-Scale Quarrying
Primary bench breaking and boulder reduction at granite, basalt and hard limestone quarries. Maximum productivity per shift on the hardest materials.
Hard Rock Excavation
Primary rock excavation for major infrastructure — tunnels, deep foundations, dam construction and large-scale earthworks in hard rock terrain.
Major Demolition
Demolition of large reinforced concrete structures — industrial buildings, bridges, retaining walls and port infrastructure.
Mining Secondary Breaking
High-throughput secondary breaking of oversized ore and waste rock at open-cut and surface mining operations.
Heavy Road Construction
Rock cutting for major highway and motorway construction in mountainous terrain — deep cuts, rock faces and hard sub-base preparation.
Port & Marine Works
Underwater rock breaking for harbour deepening, jetty construction and marine infrastructure in challenging submerged conditions.
Installation Guide
Six-step commissioning procedure for the PANDA FORCE PF200.
Verify Hydraulic Compatibility
Confirm excavator auxiliary flow (130–200 L/min) and working pressure (160–200 bar). Check back pressure does not exceed 30 bar at the return port. High-flow auxiliary circuit is mandatory.
Mount the Heavy-Duty Bracket
Fit the correct heavy-duty S-type or pin-on bracket to the excavator arm. Use a crane or lifting equipment — the PF200 bracket assembly weighs 180 kg. Torque all mounting pins to specification.
Connect Hydraulic Hoses
Connect pressure and return hoses using 1.25-inch BSP or SAE O-ring fittings. Use hydraulic hose rated for 350 bar working pressure minimum. Purge air from hoses before pressurising.
Grease the Chisel
Apply NLGI Grade 2 lithium-complex grease to the 170 mm chisel shank. Initial greasing: 15 pumps. Ongoing: 3 pumps every 2 operating hours. Auto-lube system strongly recommended.
Set Hydraulic Flow
Set excavator auxiliary flow to 160 L/min and pressure to 180 bar for initial commissioning. Adjust within the specified range. Do not exceed 200 L/min or 200 bar under any circumstances.
Functional Test
Test at low pressure (120 bar) for 10 minutes. Check all connections for leaks, verify correct impact rate and listen for abnormal noise. Increase to working pressure in stages once satisfied.
Customer Case Studies
Verified field results from PF200 deployments across three continents.
Frequently Asked Questions
Technical and commercial questions about the PANDA FORCE PF200.
Ready to Order the PF200?
Contact our global sales team for pricing, lead times and compatibility confirmation for your excavator model.