Hydraulic Breaker · Compact Class
PANDA FORCE PF30
350 J Impact Energy · 1.5–4 Tonne Excavators · 68 mm Chisel
The PF30 is PANDA FORCE's compact hydraulic breaker, purpose-built for mini and small excavators in the 1.5–4 tonne class. Ideal for urban demolition, trenching, landscaping and confined-space breaking where a full-size breaker cannot reach. Manufactured by SOOSAN Heavy Industries.
Technical Specifications
Full specification data for the PANDA FORCE PF30 hydraulic breaker.
| Model | PANDA FORCE PF30 |
| Operating Weight | 300 kg |
| Applicable Excavator | 1.5–4 t |
| Impact Rate | 600–1,200 bpm |
| Impact Energy | 350 J |
| Required Oil Flow | 20–40 L/min |
| Working Pressure | 100–140 bar |
| Back Pressure (max) | 15 bar |
| Chisel Diameter | 68 mm |
| Chisel Length | 400 mm |
| Tool Stroke | 280 mm |
| Mounting | Standard mini excavator bracket (pin-on) |
| Hose Connections | 1/2-inch BSP / SAE O-ring face seal |
| Body Dimensions (L×W×H) | 980 × 240 × 210 mm |
| Noise Level | ≤ 98 dB(A) at 1 m |
| Warranty | 12 months / 2,000 operating hours |
Engineering Details
Six key engineering systems that define PF30 performance and reliability.
Nitrogen Gas Accumulator
Compact sealed nitrogen chamber smooths hydraulic pressure pulses, protecting the mini excavator's hydraulic pump and reducing heat build-up during continuous operation.
Auto-Lube Greasing Port
Single-point greasing port compatible with automatic lubrication systems. Correct greasing every 2 hours extends chisel bush life beyond 600 operating hours.
Tie-Rod Construction
High-tensile steel tie rods clamp all major components into a rigid assembly — no welded stress joints. Withstands the high-frequency impact loads of compact breaking work.
Wear-Resistant Front Head
Front head machined from high-chromium alloy steel (HRC 50–54). Replaceable chisel bush keeps maintenance costs low — no need to replace the entire front head.
Idle-Blow Protection
Pressure-sensing idle-blow cut-off stops the piston within 0.3 seconds of chisel contact loss, preventing blank-fire damage that is especially destructive in compact-class breakers.
Compact Low-Profile Design
Reduced overall height and narrow body profile allows the PF30 to operate in confined spaces — basements, narrow trenches and indoor demolition sites inaccessible to larger breakers.
Excavator Compatibility
Verified compatible excavator models in the 1.5–4 tonne class. Always confirm auxiliary flow and pressure before ordering.
| Brand | Models | Oil Flow | Pressure | Notes |
|---|---|---|---|---|
| Caterpillar (CAT) | CAT 301.5–CAT 304 | 20–40 L/min | 100–140 bar | Auxiliary flow varies by model; confirm before ordering |
| Komatsu | PC18–PC35 | 20–38 L/min | 100–135 bar | BSP fittings standard on PC18–PC26 |
| Hitachi | ZX17–ZX35 | 20–40 L/min | 100–140 bar | ZX35 preferred for upper flow range |
| Kubota | KX016–KX040 | 18–38 L/min | 100–135 bar | KX040 ideal match for PF30 |
| Yanmar | SV17–SV40 | 18–38 L/min | 100–135 bar | Confirm auxiliary circuit on SV17 |
| Bobcat | E20–E35 | 20–38 L/min | 100–135 bar | E35 recommended for best performance |
| SANY | SY16–SY35 | 20–40 L/min | 100–140 bar | Confirm auxiliary circuit before ordering |
| XCMG | XE15–XE35 | 18–38 L/min | 100–135 bar | BSP fittings; XE35 recommended |
PANDA FORCE Breaker Range Comparison
How the PF30 sits within the full PANDA FORCE hydraulic breaker lineup.
| Specification | PF30 | PF70 | PF121 | PF200 |
|---|---|---|---|---|
| Operating Weight | 300 kg | 700 kg | 1,200 kg | 2,000 kg |
| Applicable Excavator | 1.5–4 t | 4–10 t | 10–20 t | 20–40 t |
| Impact Energy | 350 J | 1,200 J | 3,500 J | 8,000 J |
| Impact Rate | 600–1,200 bpm | 500–1,000 bpm | 400–900 bpm | 300–700 bpm |
| Required Oil Flow | 20–40 L/min | 40–80 L/min | 80–130 L/min | 130–200 L/min |
| Chisel Diameter | 68 mm | 100 mm | 135 mm | 170 mm |
| Typical Application | Trenching, light demo | Medium rock, concrete | Hard rock, heavy demo | Quarry, large demolition |
Application Gallery
Six primary application sectors where the PF30 delivers proven performance.
Urban Demolition
Selective demolition in confined urban sites — basement walls, indoor slabs and narrow-access structures where larger breakers cannot operate.
Light Rock Breaking
Breaking soft to medium rock, frozen ground and compacted sub-base in trenching and foundation preparation work.
Landscaping & Hardscaping
Breaking concrete paths, garden walls, paving slabs and decorative stone in residential and commercial landscaping projects.
Utility Trenching
Cutting trenches through concrete, asphalt and rock for water, gas, electrical and telecommunications utility installation.
Renovation & Refurbishment
Interior demolition of concrete floors, walls and structural elements during building renovation and refurbishment projects.
Agricultural Breaking
Breaking rocky ground, irrigation channel preparation and removal of old concrete farm structures in agricultural settings.
Installation Guide
Six-step commissioning procedure for the PANDA FORCE PF30.
Verify Hydraulic Compatibility
Confirm mini excavator auxiliary flow (20–40 L/min) and working pressure (100–140 bar). Check back pressure does not exceed 15 bar at the return port.
Mount the Bracket
Fit the correct pin-on bracket to the excavator arm. Torque all mounting pins to manufacturer specification. Fit lock pins and safety clips.
Connect Hydraulic Hoses
Connect pressure and return hoses to the breaker ports using 1/2-inch BSP or SAE O-ring fittings. Purge air from hoses before pressurising.
Grease the Chisel
Apply NLGI Grade 2 lithium-complex grease to the chisel shank. Initial greasing: 8 pumps. Ongoing: 2 pumps every 2 operating hours.
Set Hydraulic Flow
Set excavator auxiliary flow to 30 L/min and pressure to 120 bar for initial commissioning. Adjust within the specified range for optimal performance.
Functional Test
Test at low pressure (80 bar) for 5 minutes. Check for leaks, abnormal noise and correct impact rate. Increase to working pressure once satisfied.
Customer Case Studies
Verified field results from PF30 deployments across three continents.
Frequently Asked Questions
Technical and commercial questions about the PANDA FORCE PF30.
Ready to Order the PF30?
Contact our global sales team for pricing, lead times and compatibility confirmation for your excavator model.